Bike Drivetrain Tools

Giant Tool Shed Chain Tool is a compact chrome chain tool for servicing, removing and replacing chains. Small enough to take along with you on the ...

Many derailleur chains use a “master link” that allows the chain to be installed and removed by hand. While this type of masterlink doesn't requir...

A shop favorite updated to work on all chains including single-speed and all multi-speed, 5 to 12-speed derailleur chains. Because of the tremendo...

The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers solving a high percentage o...

To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly ...

The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut...

A shop favorite updated to work on all chains including single-speed and all multi-speed, 5 to 12-speed derailleur chains. Because of the tremendou...

Features: Fits 8-11 speed chains One piece die-casting Double-sided replaceable pins Integrated bottle cap opener Chain clip

This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and super strong rep...

Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, sh...

Commonly referred to as a “4th Hand,” the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-ha...

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains, including SRAM AXS 12 speed, as...

These small, nickel plated wrenches can be used on brakes, derailleurs, etc. CBW wrenches are nominally 1/8" (3.2mm) thick. CBW-1 FEATURES 8mm and...

These small, nickel plated wrenches can be used on brakes, derailleurs, etc. CBW wrenches are nominally 1/8" (3.2mm) thick. CBW-4 FEATURES 9mm and...

Clean out or restore damaged threads in crank arms with these pedal taps. These taps can be used with either steel or alloy crank arms. Set include...

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.  ...

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.  ...

The Interlock Chain Breaker is designed for use only with the Shadow Interlock chains. FEATURES Designed to work exclusively with the Shadow Inter...

Pro cable tools are made from high quality steel capable of providing thousands of clean, crisp cuts. By offering a separate cable cutter and hous...

Makes hydraulic disc brake maintenance and repair faster and easier. FEATURES Wedge-shaped tool slides into a hydraulic disc brake caliper to pre-...

SRAM Bleeding Edge Tool FEATURES Fits Code R, Code RSC, Guide R, Guide RS, Guide RSC, Guide Ultimate, Level TLM, Level Ultimate, SRAM RED eTap HR...

Shimano Disc Brake Caliper Pad Spacers FEATURES Useful for setting correct pad spacing when installing calipers or transporting bikes with their w...

Enduro BB86/92 Tool Set

We call these our offset wrenches because of their unique design, which allows them to be used in tight places, such as centering caliper brakes. O...